Accessories / Options
Quick Start Guide
9
Assembly screw (4)
●
XSS5+15FNK
M5 × 15
Assembly screw (4)
●
XYN4+F25FJK
M4 × 25
Bracket
●
TBL5ZA32911 (TX-L32ET5B)
●
TBL5ZA32831 (TX-L37ET5B)
●
TBL5ZA32921
TX-L42ET5B
TX-L47ET5B
TX-L55ET5B
(
)
Base
●
TBL5ZX03551 (TX-L32ET5B)
●
TBL5ZX03541 (TX-L37ET5B)
●
TBL5ZX03531 (TX-L42ET5B)
●
TBL5ZX03511 (TX-L47ET5B)
●
TBL5ZX03851 (TX-L55ET5B)
1
Assembling the pedestal
Use the assembly screws to fasten the bracket
to the base securely.
●
Make sure that the screws are securely
tightened.
●
Forcing the assembly screws the wrong way
will strip the threads.
2
Securing the TV
Use the assembly screws to fasten securely.
●
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
●
Carry out the work on a horizontal and level surface.
B
Arrow mark
Hole for pedestal installation
C
D
A
Front
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1
Remove the assembly screws from the TV.
2
Pull out the pedestal from the TV.
3
Remove the assembly screws from the bracket.
Adjusting the panel to your desired angle
●
Do not place any objects within the full rotation range.
15°
15°
(View from the top)
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
●
The place where the pedestal is to be fixed should be thick enough and made of hard material.
Screw (not supplied)
Diametre
55 inches model: 4 mm
Other inches model: 3 mm
Length: 25 - 30 mm
Screw hole
