25
7.11. Remove the C1-Board
1. Remove the Hanger metal R and the Stand bracket R.
(See section 7.10.)
2. Remove the flexible cable holder fastening screws (
×
8
).
3. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
4. Disconnect the flexible cables (C10 and C11).
5. Remove the screws (
×
5
) and remove the C1-Board.
7.12. Remove the C2-Board
1. Remove the Tuner unit. (See section 7.5.)
2. Remove the Hanger metal L and the Stand bracket L.
(See section 7.10.)
3. Remove the flexible cable holder fastening screws (
×
8
).
4. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C20 and C21).
6. Disconnect the connectors (C23 and C25).
7. Remove the screws (
×
5
) and remove the C2-Board.
7.13. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the plasma panel fastening screws (
×
3 )
and
remove the cabinet assy.
2. For leaving the cabinet assy from the plasma panel, pull
the bottom of the cabinet assy forward, lift, and remove.
Summary of Contents for Viera TH-P46X20K
