T
uning Channels
31
Advanced
Display a message
New Channel Message
Selects whether to give a message when new Digital TV channels are found.
(Off / On)
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
Set Digital TV channel manually
Digital TV Manual Tuning
Set Analogue TV channel manually
Analogue TV Manual Tuning
Manual Tuning
Set Analogue TV channel manually after Analogue TV Auto Tuning.
If a VCR is connected only with the RF cable, select channel position “0”.
1 BBC1
CH33
Analogue TV Manual Tuning
Manual Tuning
0
75
CH33
Select a channel position
Select a channel
Search and store
store
search
●
Update channels automatically
Update Channel List
You can add new channels, delete duplicated channels, update channel name and position automatically to
Channel List.
Digital TV Update Channel List
RF Ch
Type
Quality
Digital TV: 0
Searching
Analogue Scan
21
68
Scan
CH 6
69
This will take about 3 minutes.
Channel Name
The Digital TV Channel List is updated with the current settings
saved as they are.
●
Normally use “Digital TV Auto Tuning” or “Update Channel List” to update Digital TV channels on your channel
list.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
Digital TV Manual Tuning
Analogue Scan
21
68
Physical Channel
No.
Type
New
Digital TV: 0
Signal Strength
0
10
Signal Quality
0
10
MHz
562.00
[CH32]
Channel Name
select physical channel
search
adjust frequency (set where the level of
“Signal Quality” becomes the maximum)
All channels found will be added to the Digital TV Channel List.
●
Check Digital TV signal
Digital TV Signal Condition
Selects a channel and checks the Digital TV signal condition.
To change the channel
●
A good Signal Strength is not an indication of suitable signal for Digital TV
reception. Please use the Signal Quality indicator as follows:
Signal Quality:
Green bar Good
Yellow bar Poor
Red bar Bad (Check the aerial)
●
●
●
Digital TV Signal Condition
Channel Name
101 DZFinfokanal
Network Name
RiksTV
RF Parameter
[CH32] 562.00MHz
Signal Quality
Signal Strength
0
2
4
6
8 10
