Advanced
How to Use Menu Functions
33
Menu
Item
Adjustments / Configurations (alternatives)
Sound
Digital Audio
Preference
Selects the initial setting for audio tracks
(Dolby D / HE-AAC)
Dolby D : The priority is given in the following order - Dolby Digital,
HE-AAC, MPEG1.
HE-AAC : The priority is given in the following order - HE-AAC, MPEG1,
Dolby Digital.
Dolby Digital is the method of coding digital signals developed by Dolby
●
Laboratories. Apart from stereo (2ch) audio, these signals can be multi-
channel audio.
HE-AAC is a perceptual coding method used to compress digital audio
●
for efficient storage and transmission.
MPEG1/Layer-2 is an audio compression method that compresses
●
audio to the smaller size without any considerable loss of audio quality.
Digital TV mode only
●
SPDIF Selection
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal
(Auto / PCM)
Auto : Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
PCM : Digital output signal is fixed to PCM.
For Digital TV mode, Video mode (p. 54) or Network video contents
●
(p. 64)
MPEG Optical
Level
Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT
terminal as the initial setting
(0 / -2 / -4 / -6 / -8 / -10 / -12dB)
●
Normally, MPEG sound is louder comparing with the other types of audio track.
Digital TV mode only
●
HDMI1 / 2 / 3 / 4
Input
Select to fit the input signal
(Digital / Analogue)
(p. 75).
Digital : HDMI cable connection
Analogue : HDMI-DVI adaptor cable connection
HDMI input mode only
●
Reset
Sound Defaults
Press the OK button to reset settings of the present Mode, Balance,
Headphone Volume and Surround in the Sound Menu to the default.
Setup
3D Settings
Adjusts and sets to view 3D images (p. 26)
PC Setup
Input
Resolution
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
●
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
Options change depending on signals
●
Clock
Set to the minimum level if noise occurs.
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates flicker and distortion
Adjust after Clock adjustment
●
●
Set to the minimum level if noise occurs
Sync
PC sync signal type
(H & V / SOG)
H & V : by the horizontal and vertical signals from your PC
SOG : Sync on Green sync from your PC
Reset
PC Settings
Press the OK button to reset the PC Setup settings to the default.
DVI Position
Settings
H-pos
Adjusts horizontal position settings of DVI
V-pos
Adjusts vertical position settings of DVI
Reset DVI
Position Settings
Press the OK button to reset the DVI Position Settings to the default.
Off Timer
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
USB HDD Setup
Registers the connected USB HDD and makes the settings for the
recording (p. 46)
Child Lock
Locks a channel / AV input to prevent access to it (p. 42)
