background image

Accessories / Options

8

B

Ex

Ple

lea

 

K

 

D

 

T

c

 

If

th

 

Y

s

 

A

th

 

V

 

O

 

R

Optional accessories

Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. 

For additional details, please refer to the manual of the optional accessories.

Wireless

LAN Adaptor

 

DY-WL10E-K

Caution

 

To use the Wireless LAN Adaptor, your network needs to have a Wireless Access 

Point.

 

It is recommended to use the Wireless LAN Adaptor with the extension cable.

 

To avoid radio wave interference, keep the TV away from the devices such as 

other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 

5 GHz signals when using the Wireless LAN Adaptor. Otherwise malfunction may 

occur.

 

This optional accessory may not be available in your market region.

 

Additional information for Wireless LAN Adaptor and Wireless Access Point may 

be found at the following web site. (English only) 

http://panasonic.jp/support/global/cs/tv/

Wall-hanging 

bracket

 

TY-WK3L2RW

The angle of 

wall-hanging 

bracket can 

be adjusted 

in  “zero tilting 

(vertical)” and 

“5 or 10-degree 

tilting”for this TV.

(View from the side)

Holes for wall-hanging 

bracket installation

Depth of screw:

minimum 7 mm 

maximum 13 mm

Screw Thread Type: M4

Screw for fixing the TV onto the wall-hanging 

bracket (not supplied with the TV)

200 mm

200 mm

Rear of the TV

Warning

 

Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself 

have the risk of personal injury and product damage. In order to maintain the 

unit’s performance and safety, be absolutely sure to ask your dealer or a licensed 

contractor to secure the wall-hanging brackets. Any damage caused by installing 

without a qualified installer will void your warranty.

 

Do not mount the unit directly below ceiling lights (such as spotlights, floodlights 

or halogen lights) which typically give off high heat. Doing so may warp or damage 

plastic cabinet parts.

 

Take care when fixing wall brackets to the wall. Always ensure that there are no 

electrical cables or pipes in the wall before hanging bracket.

 

To prevent fall and injury, remove the TV from its fixed wall position when it is no 

longer in use.

AC

50

TH-L42U30A-EN.indd   8

TH-L42U30A-EN.indd   8

3/14/2011   5:40:13 PM

3/14/2011   5:40:13 PM

Summary of Contents for VIERA TH-L42U30A













































































Reviews: