Auto T
uning
14
Setup the network connection
Set up the network connection to enable the network service functions such as VIERA Connect, etc.
(p. 16, 55).
•
To set up the wireless connection, the Wireless LAN Adaptor is required.
•
Please note that this TV does not support wireless public access points.
•
Ensure the network connections and network environment are completed before starting setup.
1
Connect the LAN cable or Wireless LAN Adaptor
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a
broadband network environment.
Internet
environment
Internet
environment
Wired connection
Wireless connection
Access point
LAN cable (Shielded)
•
Use the Shielded Twist Pair (STP) LAN cable.
or
Wireless LAN Adaptor and
Extension cable
•
Connect to the USB 1, 2 or 3 port.
Rear of the TV
•
If you do not have any broadband network services, please consult your retailer for assistance.
•
For more information of the network connections (p. 47)
2
Select [Wired] or [Wireless]
Network Setup
Select Wired or Wireless
Wired
Wireless Set Later
access
select
3
Start the settings
■
[Wired]
Select [Auto]
Acquire IP Address
Auto
Manual
access
select
•
To set manually, select [Manual] and
set each item. For details
(p. 49 - 50)
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Connection Test
Automatically setup is done and the test of the
network connection starts.
: succeeded
The test is successful and the TV is
connected to the network.
: failed
Check the settings and connections, and
then select [Retry]
