Auto Setup
14
Auto Setup
Search and store TV channels automatically.
●
These steps are not necessary if the setup has been completed by your local dealer.
●
Please complete connections (p. 12 - 13) and settings (if necessary) of the connected equipment before starting
Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
1
Plug the TV into mains socket and switch On
●
Takes a few seconds to be displayed
2
Select your area
New South Wales/Australian Capital Territory
Victoria
Queensland
South Australia
Western Australia
Northern Territory
Tasmania
Select State / Territory
Select
Access
Auto Tuning starts
Automatic Channel Search
Searching channels...
Analogue : 0
Digital : 1
EXIT
RETURN
Scan
5%
●
Auto Setup will start to search for
TV channels and store them.
The stored channels and sorted
channel order vary depending
on the area, broadcasting
system and conditions of signal
reception.
Auto Setup screen varies depending on the area you select.
3
Select [Home]
Select [Home] viewing environment to use in your home environment.
Please select your viewing environment.
Home
Shop
Confirm
Change
■
[Shop] viewing environment (for shop display only)
[Shop] viewing environment is the demonstration mode to explain main features of this TV.
Select [Home] viewing environment to use in your home environment.
●
You can return to viewing environment selection screen at the stage of Shop confirmation screen.
1
Return to viewing environment
selection screen
2
Select [Home]
Shop
You have selected shop mode
Please select your viewing environment.
Home
Shop
Confirm
Change
To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.
[Shipping Condition] (p. 34)
Auto Setup is now complete and your TV is ready for viewing.
If tuning has failed, check the connection of the RF cable, and then, follow the on screen instructions.
●
To check channel list at-a-glance
“Using TV Guide” (p. 20)
●
To edit or hide (skip) channels
“Tuning and Editing Channels” (p. 30 - 32)
●
To retune all channels
“Retuning from Setup Menu” (p. 29)
●
To add the available TV mode later
[Scan] (p. 30)
●
To initialise all settings
[Shipping Condition] (p. 34)
TH-L32XM5A_EN.indb 14
TH-L32XM5A_EN.indb 14
7/27/2012 5:18:03 PM
7/27/2012 5:18:03 PM