Advanced
31
•
T
uning Programmes
Any new services found will be added to the DVB Service List.
Add New DVB Services
Channel
Service Name
Type
Quality
Free TV: 0
Pay TV: 0
Radio: 0
Data: 0
Searching
Analogue Scan
21
68
Scan
5
69
This will take about 3 minutes.
•
The new service is added with the current settings
saved as they are.
Add DVB
programme
automatically
Add New
DVB Services
Selects whether to give a noti cation message when a new DVB service is found.
(Off / On)
New DVB service found!
Press OK to add new service.
Press EXIT to lgnore.
Display a
noti cation
message
New Service
Message
Auto Setup - Digital
This will take about 3 minutes.
Scan
5
69
62
Channel
Service Name
Type
Quality
CBBC Channel
Free TV
10
62
BBC Radio Wales
Free TV
10
62
E4
Free TV
10
62
Cartoon Nwk
Free TV
10
Free TV: 4
Pay TV: 0
Radio: 0
Data: 0
Searching
EXIT
RETURN
Start Auto Setup
All digital tuning data will be erased
Auto Setup
Start Auto Setup
Settings are made automatically
•
All the previous tuning settings are erased.
•
The programme, language, country / region settings are downloaded to a Q-Link or
VIERA Link compatible equipment connected to the TV.
•
When the operation is completed, the programme at programme position “1” will be displayed.
•
If tuning has not been done completely “DVB Manual Tuning”, “Analogue Manual Tuning”
Automatically retune all DVB or Analogue programmes received in the area.
•
Only DVB programmes are retuned in DVB mode.
•
Only Analogue programmes are retuned in Analogue mode.
•
If a Child Lock PIN number (p. 32) has been set, it must be entered.
Set all DVB
or Analogue
programmes
automatically
Auto Setup
DVB Signal Condition
DVB Programme
[CH70] CBBC Channel
Signal Quality
Signal Strength
0
10
0
10
Selects a programme and checks the DVB signal condition.
•
To change the programme
A good Signal Strength is not an indication of
suitable signal for DVB reception. Please use
the Signal Quality indicator as follows:
Signal Quality:
•
Green bar
Good
•
Yellow bar
Poor
•
Red bar
Bad (Check the aerial)
Check
DVB signal
DVB Signal
Condition
Set DVB
programme
manually
DVB Manual
Tuning
Normally use “Auto Setup” or “Add New DVB Services” to add DVB programmes to your
service list.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
select channel
search
DVB Manual Tuning
Analogue Scan
21
68
Frequency
Prog.
Service Name
Type
New
Free TV: 0
Pay TV: 0
Radio: 0
Data: 0
Stopped
Signal Strength
0
10
Signal Quality
0
10
MHz
474,00
[CH21]
•
All services found will be added to the
DVB Service List.
adjust frequency (set where the level of
“Signal Quality” becomes the maximum)
Set Analogue
programme
manually
Analogue
Manual Tuning
1 BBC1
CH33
Analogue Manual Tuning
Sound System
Manual Tuning
2
78
41
1
Fine Tuning
SC1
Colour System
Auto
CH33
Fine Tuning
Use to make small adjustments to the tuning of an individual programme (affected by
weather conditions, etc.)
Manual Tuning
Set Analogue programme manually after Auto Setup.
•
Set Sound System and Colour System, and then perform this function.
Normally set Colour System “Auto”.
•
If a VCR is connected only with the RF cable, select programme position “0”.
SC1: PAL B, G, H / SECAM B, G
SC2: PAL I
SC3: PAL D, K / SECAM D, K
F: SECAM L / L’
store
search
Search and store
Select the programme
Select the programme position
