background image

English

18

  Maintenance

 First, remove the mains plug from the 
mains socket.

 Display panel, Cabinet, Pedestal

 Regular care:

 Gently wipe the surface of the display panel, cabinet, 
or pedestal by using a soft cloth to remove dirt or 
fingerprints.

 For stubborn dirt:

 (1)  First clean the dust from the surface.
 (2)  Dampen a soft cloth with clean water or diluted 

neutral detergent (1 part detergent to 100 parts 
water).

 (3)  Wring out the cloth firmly. (Please note, do not let 

liquid enter the TV inside as it may lead to product 
failure.)

 (4)  Carefully wipe moisten and wipe away the stubborn 

dirt.

 (5)  Finally, wipe away all the moisture.

 Caution

 

 Do not use a hard cloth or rub the surface too hard, 
otherwise this may cause scratches on the surface.

 

 Take care not to subject the surfaces to insect 
repellent, solvent, thinner or other volatile substances. 
This may degrade surface quality or cause peeling of 
the paint.

 

 The surface of the display panel is specially treated 
and may be easily damaged. Take care not to tap or 
scratch the surface with your fingernail or other hard 
objects.

 

 Do not allow the cabinet and pedestal to make 
contact with a rubber or PVC substance for a long 
time. This may degrade surface quality.

 Mains plug

 Wipe the mains plug with a dry cloth at regular intervals. 
Moisture and dust may cause fire or electrical shock.

  FAQs

 Before requesting service or assistance, please follow 
these simple guides to solve the problem.

 

 For details, refer to [eHELP] (Support > FAQs).

 

 The TV does not switch on

 

 Check the mains lead is plugged into the TV and the 
mains socket.

 

 The TV goes into Standby mode

 

 Auto power standby function is activated.

 

 The remote control does not work or is intermittent

 

 Are the batteries installed correctly?   

(p. 13)

 

 Has the TV been switched on?

 

 The batteries may be running low. Replace them with 
new ones.

 

 Point the remote control directly at the TV’s remote 
control signal receiver (within about 7 m and a 30 
degree angle of the signal receiver).

 

 Situate the TV away from sunshine or other sources 
of bright light so they do not shine on the TV’s remote 
control signal receiver.

 

 No image is displayed

 

 Check the TV is turned on.

 

 Check the mains lead is plugged into the TV and the 
mains socket.

 

 Check the correct input mode is selected.

 

 Check the setting of [AV] ([COMPONENT] / [VIDEO]) 
in [Input Selection] to match the signal being output 
by the external equipment.

 

 Is [Backlight], [Contrast], [Brightness] or [Colour] in 
the Picture Menu set to the minimum?

 

 Check all required cables and connections are firmly 
in place.

 

 An unusual image is displayed

 

 This TV has a built-in Self Test. Makes a diagnosis of 
picture or sound problems.

   [TV Self Test] (Help Menu)

 

 Turn the TV off with Mains power On / Off switch, 
then turn it on again.

 

 If the problem persists, initialise all settings.

    [Shipping Condition] in [System Menu] (Setup 

Menu)

 

 Parts of the TV become hot

 

 Parts of the TV may become hot. These temperature 
rises do not pose any problems in terms of 
performance or quality.

 

 When pushed with a finger, the display panel moves 
slightly and makes a noise

 

 There is a little gap around the panel to prevent 
damage to the panel. This is not a malfunction.

Summary of Contents for Viera TH-60CX700A

























Reviews: