background image

6

7

Quick Start 

Guide

 Accessories/Optional Accessory

A

a

b

B

Accessories/Optional Accessory

1

Open

Hook

2

Note the correct polarity
(+ or -).

Close

Caution

Wall-hanging bracket

Accessories

(angle)

• 

TY-WK42PR3U

 (TH-50PZ750U)

Caution

Do not use any television or displays other than those given in this Operating Instructions.

• 

Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

• 

If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic 
Dealer immediately.

During set-up, make sure that all screws are securely tightened.

• 

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to 
support the TV, and it might fall over and become damaged, and personal injury may result.

Use the accessory fall-prevention brackets to secure the TV.

• 

If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal 
injury may result.

Warning

Do not disassemble or modify the pedestal.

• 

Otherwise the TV may fall over and become damaged, and personal injury may result.

Check you have all the items shown.

 Base (1)

M5 x 16 (For 50 ”)
M6 x 20 (For 58 ”)

M5 x 65

Pole (2)

Remote Control
Transmitter

N2QAYB000099

Cable clamper 

(2)

Batteries for the
Remote Control
Transmitter 

(2)

AA Battery

AC cord

Antenna Adapter

F-Type for 5C-2V

Pedestal

TBL2AX00211

(TH-50PZ750U)

TBL2AX00221

(TH-58PZ750U)

How to assemble (p.7)

Note

• 

In order to maintain the TV’s performance and 
safety, be absolutely sure to ask your dealer or 
a licensed contractor to secure the wall-hanging 
brackets.

• 

Carefully read the instructions accompanying the 
plasma TV stand or pedestal, and be absolutely 
sure to take steps to prevent the TV from tipping 
over.

• 

Handle the TV carefully during installation since 
subjecting it to impact or other forces may cause 
its paneling to crack.

(vertical)

• 

TY-WK42PV3U

 (TH-50PZ750U, 

 TH-58PZ750U)

• 

Fix securely with assembly screws 

B

(Total 4 screws)

B

Assembly screw 
(4 of each)

A

Fix 
with 

A

Optional Accessory

Installing the remote’s batteries

Attaching the pedestal to TV

Accessories

a

b

Pole

Front

Pole
( )

Pole
( )

Pole

Front

Align the stamped 
marks.

Align the stamped 
marks.

Set-up

Label

Rear side

Arrow mark

Pole

Hole for pedestal 
installation 

• 

Carry out work on a horizontal and level surface.

Assembling the pedestal

• 

Fix securely with assembly 
screws 

A

. (Total 4 screws)

Pole

 Base 

Bottom view

Product Registration Card (U.S.A.)

Customer Care Plan Card (U.S.A.)

Operating Instructions

Quick Setup Guide 
(For viewing HD programming)

• 

Incorrect installation may cause battery 
leakage and corrosion, resulting in 
damage to the remote control.

• 

Do not mix old and new batteries.

• 

Do not mix different battery types (such as 
alkaline and manganese batteries).

• 

Do not use rechargeable (Ni-Cd) batteries.

• 

Do not burn or break batteries.

• 

Make a note of the remote control codes 
before changing batteries in case the 
codes are reset. (p. 45)

Summary of Contents for Viera TH-50PZ750

































































Reviews: