6
7
Quick Start
Guide
Accessories/Optional Accessory
B
A
Accessories/Optional Accessory
1
Open
Hook
2
Note the correct polarity
(+ or -).
Close
Caution
Wall-hanging bracket
Accessories
(angle)
•
TY-WK42PR3U
Check you have all the items shown.
Remote Control
Transmitter
•
N2QAYB000100
Cable clamper
(2)
Batteries for the
Remote Control
Transmitter
(2)
•
AA Battery
AC cord
Antenna Adapter
•
F-Type for 5C-2V
Pedestal
•
TBL2AX00151
Note
•
In order to maintain the TV’s performance and
safety, be absolutely sure to ask your dealer or
a licensed contractor to secure the wall-hanging
brackets.
•
Carefully read the instructions accompanying the
plasma TV stand or pedestal, and be absolutely
sure to take steps to prevent the TV from tipping
over.
•
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
its paneling to crack.
(vertical)
•
TY-WK42PV3U
Optional Accessory
Installing the remote’s batteries
Product Registration Card (U.S.A.)
Customer Care Plan Card (U.S.A.)
Operating Instructions
Quick Setup Guide
(For viewing HD programming)
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such as
alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd) batteries.
•
Do not burn or break batteries.
•
Make a note of the remote control codes
before changing batteries in case the
codes are reset. (p. 45-47)
How to assemble (p.7)
Caution
Do not use any television or displays other than those given in these Operating Instructions.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
•
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
•
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to
support the TV, and it might fall over and become damaged, and personal injury may result.
Use the accessory fall-prevention brackets to secure the TV.
•
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
Warning
Do not disassemble or modify the pedestal.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Base (1)
M5 x 20
M5 x 65
Pole (2)
•
Fix securely with assembly
screws
B
.
(Total 4 screws)
B
Assembly screw
(4 of each)
A
Attaching the pedestal to TV
Accessories
■
Set-up
Label
Rear side
Arrow mark
Pole
Hole for pedestal
installation
•
Carry out work on a horizontal and level surface.
■
Assembling the pedestal
Pole
Base
Bottom view
For 50˝ Plasma
television (Outside)
Insert the poles into the left and right holes in the
underside of the base so that they fit securely as
shown in the illustration above.
Installing the poles
Securing the poles
Front
Use the assembly
A
screws to secure the poles firmly
to the bottom of the base.
Note
Forcing the assembly screws the wrong way will strip
the threads.
Base
Pole
Base
Pole
