Panasonic VIERA TH-42PZ85U, Service Manual

Page: 23 / 128

23
7.21. Remove the C2-Board
1. Remove the A-Board unit. (See section 7.8.)
2. Remove the stand bracket R. (See section 7.18.)
3. Remove the DD-Heat-sink fastening screws (
× 10 ).
4. Remove the DD-Heat-sink ( × 5).
5. Disconnect the flexible cables (CB7, CB8, CB9, CB10
and CB11).
6. Disconnect the flexible cables (C20, C21, C22 and C26).
7. Remove the screws (
×
5 ) and remove the C2-Board.
7.22. Remove the C3-Board
1. Remove the Side terminal unit assy. (See section 7.12.)
2. Remove the DD-Heat-sink fastening screws (
×
8 ).
3. Remove the DD-Heat-sink (
×
4).
4. Disconnect the flexible cables (CB12, CB13, CB14 and
CB15).
5. Disconnect the flexible cable (C36).
6. Disconnect the connectors (C33 and C35).
7. Remove the screws (
× 4 ) and remove the C3-Board.
7.23. Remove the Speakers
1. Disconnect the relay connectors
2. Remove the screws (
× 4 each) and remove the
Speaker (L, R).
7.24. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw
( × 1 each).
2. Remove the cabinet assy and the plasma panel fastening
screws (
×
8 ,
×
6 ).
3. For leaving the plasma panel from the front frame, pull the