22
7.18. Remove the G-Board, GS-
Board and GH-Board
1. Remove the Front bracket. (See section 7.17.)
2. Remove the screws (
×
5 ).
3. Remove the screws (
×
4 ).
4. Remove the Front shield case front and the Front shield
top.
5. Remove the GH-Board.
6. Remove the screws (
×
2
) and remove the GS-Board.
7. Remove the screws (
×
3 ).
8. Disconnect the connector (G51) and remove the G-
Board.
7.19. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw
(
×
1
each).
2. Remove the cabinet assy and the plasma panel fastening
screws (
×
4 ,
×
6 ).
3. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
Summary of Contents for VIERA TH-42PZ800U
