FAQs, etc.
•
Technical Information
Pin No.
Signal Name
Pin No.
Signal Name
Pin No.
Signal Name
R
GND (Ground)
NC (not connected)
G
GND (Ground)
NC (not connected)
B
GND (Ground)
HD/SYNC
NC (not connected)
NC (not connected)
VD
GND (Ground)
GND (Ground)
NC (not connected)
TH-42PX600EN
TH-50PX600EN
4:3
768 × 768 pixels
1,024 × 768 pixels
16:9
1,024 × 768 pixels
1,366 × 768 pixels
Aspect
Model No.
Signal name
Horizontal frequency (kHz)
Vertical frequency (Hz)
Component
HDMI
PC
525 (480) / 60i
15.73
59.94
∗
∗
525 (480) / 60p
31.47
59.94
∗
∗
625 (576) / 50i
15.63
50.00
∗
∗
625 (576) / 50p
31.25
50.00
∗
∗
750 (720) / 60p
45.00
60.00
∗
∗
750 (720) / 50p
37.50
50.00
∗
∗
1,125 (1,080) / 60i
33.75
60.00
∗
∗
1,125 (1,080) / 50i
28.13
50.00
∗
∗
640 × 400 @70 Hz
31.46
70.07
∗
640 × 480 @60 Hz
31.47
59.94
∗
640 × 480 @75 Hz
37.50
75.00
∗
800 × 600 @60 Hz
37.88
60.32
∗
800 × 600 @75 Hz
46.88
75.00
∗
800 × 600 @85 Hz
53.67
85.06
∗
1,024 × 768 @60 Hz
48.36
60.00
∗
1,024 × 768 @70 Hz
56.48
70.07
∗
1,024 × 768 @75 Hz
60.02
75.03
∗
1,024 × 768 @85 Hz
68.68
85.00
∗
1,280 × 1,024 @60 Hz
63.98
60.02
∗
Macintosh13” (640 × 480)
35.00
66.67
∗
Macintosh16” (832 × 624)
49.72
74.54
∗
Macintosh21” (1,152 × 870)
68.68
75.06
∗
1
6
7
8
3
9
4
5
10
15 14 13 12 11
2
38
39
Technical Information
HDMI connection
PC connection
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
•
PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency
59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).
•
A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.
Note
•
Some PC models cannot be connected to this TV.
•
For details of the applicable PC signals, see p. 39.
•
Max. display resolution
•
D-sub 15-pin connector signal
•
HDMI is the world's
fi
rst complete digital consumer AV interface complying with a non-compression standard.
•
If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (
∗
2).
•
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.
•
Audio settings can be made on the "HDMI1 input" menu screen. (p. 16)
•
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
(
∗
1): The HDMI logo is displayed on an HDMI-compliant equipment. (
∗
2): Enquire at your local digital equipment retailer shop.
HDMI (high-de
fi
nition multimedia interface) allows you to enjoy high-de
fi
nition digital images and high-quality sound
by connecting the TV and the equipment.
HDMI-compatible equipment (
∗
1) with an HDMI or DVI output terminal, such as a set top box or a DVD player, can
be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
Note
•
HDMI2 terminal is for digital signal only.
•
Use with a PC is not assumed.
•
The 720p/1080i signals will be reformatted before being displayed on the screen.
•
If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".
•
These HDMI connectors are "type A".
•
An equipment having no digital output terminal may be connected to the input terminal of either "Component", "S-
VIDEO", or "Video" to receive analogue signals.
•
The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p and 1080i. Match the output setting of the digital equipment.
•
For details of the applicable HDMI signals, see p. 39.
Control with HDMI
•
Setup the equipment to enable this function. Read the manual of the equipment.
•
This function may not work normally depending on the equipment condition.
•
This function may not work normally when Panasonic Player theatre is connected.
•
The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.
•
Image or sound may not be available for the
fi
rst few seconds when the playback starts.
•
Image or sound may not be available for the
fi
rst few seconds when Input mode is switched.
•
Volume function will be displayed when adjusting the volume of the equipment.
•
Easy playback is also available by using the remote control for Ampli
fi
er. Read the manuals of Ampli
fi
er.
HDMI connections to some Panasonic equipments allow you to enjoy the easy playback or home theatre.
Input signal that can be displayed
∗
Mark: Applicable input signal for Component (Y, P
B
, P
R
), HDMI and PC (D-sub 15P)
Note
•
Signals other than above may not be displayed properly.
•
The above signals are reformatted for optimal viewing on your display.
Multi Window
You can watch two images at once, such as a TV programme and a DVD. (p. 11)
•
The same source cannot be displayed at once.
•
This function cannot be used with a PC, HDMI, SD card, or when progressive signals/1080i signals
(Y, P
B
, P
R
) are being inputted.