10
11
Quick Start
Guide
Accessories/Optional Accessory
Accessories
Speaker (2)
SP-54Z1U
Mounting bracket
[Top]
(2)
TXFKR04DLUJ
Front
Back
[Lower right] (1)
TXFKR05DLUJ
Front
Back
[Lower left] (1)
TXFKR06DLUJ
Front
Back
Assembly screws
TXFXY01DLUJB
(8)
(8)
Speaker cable (2)
TXJ/SPDKUU-1
Accessories
Assembly screws (2)
TXFXY01JSUJB
M4 × 10
HDMI cable
K1HY19YY0006
9.8 ft (3.0 m)
Exclusive cable for Wireless Unit
TXFMM01JSUU
Exclusive cable for Wireless
Receiver
1.6 ft (0.5 m)
Exclusive cable for Wireless
Transmitter
3.3 ft (1.0 m)
Cable clamper (2)
TMME364
Wireless Unit (Receiver)
TU-WHR1U
Wireless Unit (Transmitter)
TU-WHT1U
Accessories/Optional Accessory
(Continued)
Attaching the pedestal to TV (continued)
Attaching the pedestal to TV
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Attaching the Speaker to TV
Fix the Mounting bracket securely to the back of the Display unit with
Assembly screws
.
Insert the speaker mounting screws
temporarily in the screw outermost
holes of the speaker and fix the speaker mounting screws
to the speaker
mounting bracket.
Orient the front side of the Mounting bracket toward the rear side of the
speaker and Display Unit side.
Fix it same as the speaker at the other side.
There will be a gap between the Display Unit and the speaker.
Mounting
bracket
[Lower right]
Assembly
screws
Back of
Display Unit
Mounting bracket
[Top]
Assembly
screws
Back of
Display Unit
Speaker
Place the temporarily inserted screws
into the counter sunk holes
on the bracket
Connect Display Unit and speaker with speaker cable.
Fix it in the same way as the speaker on the other side.
Lower right
(Back of Display Unit)
Speaker
cable
Speaker
Press the part and
remove the hook.
Hook
To open the Clamper
Connect the terminal
near the ferrite core to
the Display Unit.
Note
Tighten the screws firmly.
Insert to the end of the speaker cable terminal firmly.
Loosen the screw shown in fig.
A
above to adjust the gap between the speaker and the Display Unit.
Do not hold the speaker to transport the unit.
Connecting Display Unit, Tuner Box and Wireless Unit
■
Wired connection
Connect Display Unit to Tuner Box
HDMI
AV OUT
HDMI
AV OUT
Display Unit
Tuner
Box
HDMI Cable
■
Wireless connection
Connect Wireless Unit (Receiver) to Display Unit
Exclusive cable for Wireless Receiver
Hole for Cable
clamper
ferrite core
Insert the metal tab on the
top of the Wireless Unit
(Receiver) into the groove of
the Display Unit.
Insert the tabs on the front of
the Wireless Unit (Receiver)
into the holes at the back of
the Display Unit.
Assembly screws
Fix securely with assembly
screws (Total 2 screws).
Caution
Do not disassemble or modify the
Wireless Unit.
Connect the Exclusive cable for
Wireless Receiver which has
ferrite core on Display Unit side.
