Panasonic Viera TC-P50V10, Quick Start Manual

Page: 9 / 220

9
Quick Start
Guide
Accessories/Optional Accessory
Accessories
Assembly screws
(4 of each)
A
(for 50”)
M5 × 18 (Silver)
(for 54”)
M5 × 25 (Silver)
B
(for 50”)
M5 × 25 (Black)
(for 54”)
M5 × 30 (Black)
Poles (2)
L
R
L
or
R
is printed at the
bottom of the poles.
Base (1)
(for 50”)
(for 54”)
Attaching the pedestal to TV
■
Assembling the pedestal
Fix securely with assembly screws
A
. (Total 4 screws)
Tighten screws firmly.
(Image: TBLX0112)
A
L
R
Pole
Front
Pole
Base
■
Set-up
Carry out work on a horizontal and level surface.
Tighten screws firmly.
B
Fix securely with assembly
screws
B
. (Total 4 screws)
Rear side
Arrow
mark
Pole
Hole for pedestal
installation
Pole
Base
Bottom view
(Image: TC-P50V10)
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.