20
7.8.
Remove the Control button unit
1. Disconnect the connector (C24).
2. Remove the screws (
×
2 ).
3. Remove the Control button unit.
7.9.
Remove the GK-Board
1. Remove the Control button unit. (See section 7.8.)
2. Remove the screws (
×
2 ).
3. Remove the GK-Board MTG. metal.
4. Remove the claw (
×
3 ).
5. Disconnect the connector (GK1).
6. Remove the GK-Board from Control button.
7.10. Remove the SU-Board
1. Remove the flexible cables (SU1B, SU2B, SU3B, SU4B
and SU5B) connected to the SU-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the molding prop (
×
1 ).
4. Remove the screws (
×
2 ,
×
2
) and remove the SU-
Board.
7.11. Remove the SD-Board
1. Remove the Control button unit. (See section 7.8.)
2. Remove the flexible cables (SD1B, SD2B, SD3B, SD4B
and SD5B) connected to the SD-Board.
3. Remove the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
Summary of Contents for Viera TC-P50G15
