21
7.11. Remove the SD-Board
1. Remove the Control button unit. (See section 7.8.)
2. Remove the flexible cables (SD1, SD2, SD3 and SD4)
connected to the SD-Board.
3. Remove the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
4. Remove the molding prop (
×
1 ).
5. Remove the screws (
×
2 ,
×
2
) and remove the SD-
Board.
7.12. Remove the SC-Board
1. Remove the SU-Board and SD-Board. (See section 7.10.
and 7.11.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (
×
8
) and remove the SC-Board.
7.13. Remove the SS2-Board
1. Remove the Tuner unit. (See section 7.5.)
2. Disconnect the bridge connector (SS21-SS24) and dis-
connect the flexible cable (SS58).
3. Remove the screws (
×
2
) and remove the SS2-Board.
Summary of Contents for Viera TC-P46G15
