8
9
Quick Start
Guide
Basic Connection (A
TV)
Accessories/Optional
Accessory
To connect the antenna terminal
Accessories
Assembly screws
(4 of each)
A
M5 x 15
B
M4 × 12
Bracket (1)
Base (1)
Location
Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections) will
fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation
is essential to prevent an internal component failure. Keep away from areas of excessive heat or moisture.
Adjust the LCD panel
to your desired angle.
b
15°
15°
a
(View from above)
TC-L37D2M
a: 15.8 ” (399 mm)
b: 11.1 ”(280 mm)
TC-L42D2M
a: 17.8 ” (450 mm)
b: 12.2 ” (309 mm)
Note
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
WARNING
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Reference of connection
Antenna terminal
Pin terminals
HDMI terminal
green
blue
red
green
Firmly tighten by hand.
Match colors of plugs and terminals.
Insert firmly.
Insert firmly.
Attaching the pedestal to TV
Basic Connection
Note
Not all cables and external equipment shown in this book are supplied with the TV.
For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.
Example
Connecting Antenna (To watch TV)
Cable TV
VHF/UHF Antenna
TV
Cable
•
You need to subscribe to a cable TV service to enjoy viewing their programming.
•
To view high-definition programming select the correct video input. (p. 24)
Power Cord
(Connect after all the
other connections.)
Back of the TV
Cable TV
AC 110-127 V
60 Hz
VHF/UHF Antenna
or
■
Assembling the pedestal
■
Set-up
Fix securely with assembly
screws
A
. (Total 4 screws)
Tighten screws firmly.
Fix securely with assembly
screws . (Total 4 screws)
Tighten screws firmly.
(Image: TBLX0165)
A
Bracket
Front
Base
B
B
Foam mat or thick
soft cloth
