Watching TV
Cable / Satellite / Fiber with a box
Initial setting
1.
Connecting
Select the wiring method connecting your box to the TV,
AV IN
or
Antenna/Cable in
.
Tip: HDMI will provide the best HD picture
2.
Change INPUT
INPUT
Press the INPUT button to select the proper connection. Wait 2 seconds.
3.
Power on your Cable , Satellite or Fiber box
Use the box's remote control to change channels.
* If the box is connected to the TV using a COAX cable (Antenna/Cable in), then
set the TV channel to CH3 or CH4. Note that the picture will not be in HD.
* CC/SAP is not available when watching TV with a Cable or Satellite box
connected via HDMI.
* If your box is a high definition, then check that it is outputting 720p or 1080i
signal.
Tip: press the TV's
INFO
button to verify.
* Check your box "aspect" or "format" settings. It should be set to 16:9,
Widescreen or
FULL
.
* If the audio volume is too low, check the box's audio settings.
* Contact your Cable or Satellite provider for instructions on any box settings.
11
Summary of Contents for Viera TC-55LE54
Page 1: ...E54 series M0212 0 ...
