6
■
Handling the power supply cord
●
Insert the power plug fully into the socket outlet.
(If the power plug is loose, it could generate heat
and cause fire.)
●
Ensure that the power plug is easily
accessible.
●
Ensure the earth pin on the power plug is
securely connected to prevent electrical shock.
• An apparatus with CLASS I construction shall
be connected to a power socket outlet with a
protective earthing connection.
●
Do not touch the power plug with a wet hand.
(This may cause electrical shock.)
●
Do not use any power cord other than that
provided with this TV. (This may cause fire or
electrical shock.)
●
Do not damage the power cord. (A damaged
cord may cause fire or electrical shock.)
• Do not move the TV with the cord plugged in the
socket outlet.
• Do not place a heavy object on the cord or place
the cord near a high-temperature object.
• Do not twist the cord, bend it excessively, or
stretch it.
• Do not pull on the cord. Hold onto the power
plug body when disconnecting cord.
• Do not use a damaged power plug or socket
outlet.
●
If a problem occurs (such as no picture or
no sound), or if smoke or an abnormal odor
is detected from the Plasma TV, unplug the
power supply cord immediately.
Continued use of the TV under these conditions
might cause a fire or permanent damage to the TV.
Have the TV evaluated by an Authorized Service
Center. Servicing of the TV by unauthorized
personnel is strongly discouraged due to its high
voltage.
CAUTION
●
Do not cover the ventilation holes.
Doing so may cause the Plasma TV to overheat,
which can cause a fire or damage to the Plasma
TV.
●
Leave a space of 3 15/16” (10 cm) or more at
the top, left and right, and 2 3/4” (7 cm) or more
at the rear.
●
When using the pedestal, keep the space
between the bottom of the TV and the pedestal
or stand surface clear from objects that may
obstruct ventilation.
■
When Moving the Plasma TV
●
Be sure to disconnect all cables before moving
the Plasma TV.
Moving the TV with its cables attached might
damage the cables which, in turn, can cause fire
or electric shock.
●
To prevent an electric shock, disconnect the
power plug from the wall outlet as a safety
precaution before carrying out any cleaning.
●
Transport only in upright position.
Transporting the unit with its display panel facing
upright or downward may cause damage to the
internal circuitry.
●
Using a dry cloth, clean any dust from the
power supply cord and plug regularly.
Build-up of dust on the power cord plug can
increase humidity, which might damage the
insulation and cause a fire.
This Plasma TV radiates infrared rays;
therefore, it may affect other infrared
communication equipment. Install your infrared
sensor in a place away from direct or reflected
light from your Plasma TV.
The TV will still consume some power as long as
the power supply cord is connected to the wall
outlet.
●
Display panel is made of glass. Do not apply
strong force or impact to the display panel.
This may cause damage resulting in injury.
●
The TV is heavy. TV should be handled by 2 or
more people. Support as shown to avoid injury
by the TV tipping or falling.
