Panasonic Viera TC-50PS14, Operating Instructions Manual

Page: 6 / 24

6
Attaching the pedestal to TV
■
Assembling the pedestal
■
Set-up
Accessories
Assembly screws
(4 of each)
A B
(for 42”/50”)
M5 × 18
(Silver)
(for 54”)
M5 × 25
(Silver)
(for 42”/50”)
M5 × 25
(Black)
(for 54”)
M5 × 30
(Black)
Poles (2)
L
R
L
or
R
is
printed at
the bottom
of the poles.
Base (1)
(for 42”/50”)
(for 54”)
Fix securely with assembly
screws
A
. (Total 4 screws)
Tighten screws firmly.
Carry out work on a horizontal
and level surface.
Tighten screws firmly.
A
L
R
Pole
Front
Pole
Base
(Image: TBLX0088)
B
Fix securely with
assembly screws
B
.
(Total 4 screws)
Rear side
Arrow
mark
Pole
Hole for pedestal
installation
Pole
Base
Bottom view
(Image: TC-42PS14)
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and
personal injury may result.
Caution Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your
nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal
will not be strong enough to support the TV, and it might fall over and become damaged, and
personal injury may result.
AC cord connection
To attach To remove
Insert it firmly until the
tabs on both sides click
into place.
Keep pushing both
side snaps and pull
down