manualshive.com logo in svg

Panasonic VDR-M55EB, Operating Instructions Manual

Share
Download
Panasonic VDR-M55EB Operating Instructions Manual Download Page 132

132

Installing DVD-MovieAlbumSE

Software “DVD-MovieAlbumSE” is used to edit movies that conform to DVD Video Recording format.

1

Insert the provided CD-ROM into the PC, and 
click “DVD-MovieAlbumSE 4.1” on the “Setup 
Menu” screen.

If the “Setup Menu” screen will not appear, 
double-click the CD-ROM drive icon.

2

The screen for installing “DVD-MovieAlbumSE” 
will appear: Click “Next”.

3

Choose the TV broadcast system (NTSC or 
PAL), click “Next”.

4

If you do not change the folder where the 
software is installed, click “Next”.

To install the software in a different directory, 
click “Change” and choose the installation 
directory.

5

Check the contents, and then click “Install”.

This software is compatible only with Windows Me/2000/XP. It will not run in other versions of 
Windows, such as Windows 98SE. 

Click

Click

Click

Click

VDR-M75M55EB.book  Page 132  Tuesday, May 17, 2005  10:32 AM

Summary of Contents for VDR-M55EB





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands