manualshive.com logo in svg

Panasonic VDR-M50EB, Service Manual

Share
Download
Panasonic VDR-M50EB Service Manual Download Page 57

4.8. PROCEDURE FOR REMOVING DISC FROM FAULTY VDR-M70/M50

4.8.1. Item to be checked

Connect the AC adapter/charger or charged battery pack (power supply), making sure the ACCESS

indicator turns off, and then press the DISC EJECT button again.

Note: Even with normal product, the disc cannot be removed while the ACCESS indicator is lit or

blinking.

Information:

Connect the AC adapter/charger or charged battery pack (power supply) before pressing the DISC

EJECT button.

The DISC EJECT button will work even if a power supply is not connected.

Prohibition

After the above check, be sure to disconnect the AC adapter/charger of battery from VDR-M70/

M50.

The VDR-M70/M50 has a built-in laser emitter block. Never look into it: If laser beam strikes

your eye, it could cause serious vision damage.

4.8.2. How to remove disc

If the disc cannot be ejected after performing “4-8-1 Item to be checked”, remove it using the

procedure in this section.

Information:

Numbers in diagrams are step numbers of setting procedure, and letters in brackets [  ] show the

types of screw.

1) Turn the hood in the direction of the arrow

to remove it.

2) Remove three screws [A], and then remove

the filter piece, being careful not to scratch

the lens surface with screwdriver at this

time.

3) Remove the lens cover in the direction of the

arrow.

4) Remove the space sheet that covers the

opening for operating lock arm.

5) Use a fine-tipped flat-bladed screwdriver,

etc. to move the lock arm in the direction of

the arrow, and then open the disc cover.

Information:

When reinstalling removed components, use

the reverse procedure to removal.

Fig.4-8-1

1)

HOOD

2) [A]

3)

[A] M1.7x4 (Black)

LOCK ARM

FILTER
PIECE

LENS
COVER

DISC
COVER

57

VDR-M70EG / VDR-M70EB / VDR-M70GC / VDR-M50EG / VDR-M50EB / VDR-M50GC

Downloaded From CamcorderManual.com Panasonic Manuals

Summary of Contents for VDR-M50EB










































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands