Panasonic VARICAM LT, Operating Manual

Page: 125 / 182

– 125 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[CH2 LIMITER] Switches enable/disable of the audio channel 2 limiter when the audio recording level adjustment method
for audio channel 2 is [MANUAL].
[ON], [OFF]
f
Factory setting: [OFF]
[CH3 LIMITER] Switches enable/disable of the audio channel 3 limiter when the audio recording level adjustment method
for audio channel 3 is [MANUAL].
[ON], [OFF]
f
Factory setting: [OFF]
[CH4 LIMITER] Switches enable/disable of the audio channel 4 limiter when the audio recording level adjustment method
for audio channel 4 is [MANUAL].
[ON], [OFF]
f
Factory setting: [OFF]
[HEADROOM] Sets the headroom (standard level).
[18dB], [20dB]
f
Factory setting: [20dB]
[AUDIO OUTPUT] [MONITOR SEL1] Sets the audio channel to be output from the <PHONES> terminal.
The display channel of the audio level meter and the channel for the audio volume are also switched in
conjunction.
[CH1/2]: Outputs audio channel 1/2.
[CH3/4]: Outputs audio channel 3/4.
f
Factory setting: [CH1/2]
[MONITOR SEL2] Sets the audio format (mono, stereo, mix) to be output from the <PHONES> terminal.
When [MONITOR SEL1] is set to [CH1/2]:
[MONO CH1], [MONO CH2], [STEREO CH1/2], [MIX CH1/2]
When [MONITOR SEL1] is set to [CH3/4]:
[MONO CH3], [MONO CH4], [STEREO CH3/4], [MIX CH3/4]
f
Factory setting: [STEREO CH1/2] or [STEREO CH3/4]
[MONITOR DELAY] Sets whether to delay the audio from the <PHONES> terminal to match the monitor output.
[ON], [OFF]
f
Factory setting: [OFF]
[MONITOR VR] Adjusts the level of audio to be output from the <PHONES> terminal.
[0] - [100]
f
Factory setting: [70]
[ALARM] Sets the volume of the warning sound to be output from the <PHONES> terminal.
[LOUD], [MEDIUM], [SMALL], [OFF]
f
Factory setting: [MEDIUM]
[OUTPUT SETTINGS]
Sets the display contents of the output video and output from the <SDI OUT 1>/<SDI OUT 2>/<VF SDI> terminal.
Item Description of settings
[SDI OUT] [SDI REC REMOTE] Sets if the recording operation control function against the external device (such as recorder) connected to
the <SDI OUT 1>/<SDI OUT 2> terminal is used or not.
It can be output from the <SDI OUT 2> terminal only when [SDI OUT2 SIGNAL SEL] is set to [SDI OUT 1].
The recording operation can be controlled only when the camera is recording.
[ON]: Controls the recording operation of the external device.
[OFF]: Does not control the recording operation of the external device.
f
Factory setting: [OFF]
[SDI OUT FORMAT] Selects the signal to be output from the <SDI OUT 1>/<SDI OUT 2> terminal.
It is output in the HD (1920 × 1080) format letterbox regardless of the [MAIN PIXEL] setting.
Item that can be selected depends on the [FREQUENCY] setting. This can be selected only when
[FREQUENCY] is set to [50.00p] or [59.94p].
When [FREQUENCY] is set to [23.98p]: [23.98PsF]
When [FREQUENCY] is set to [24.00p]: [24.00PsF]
When [FREQUENCY] is set to [25.00p]: [25.00PsF]
When [FREQUENCY] is set to [29.97p]: [29.97PsF]
When [FREQUENCY] is set to [50.00p]: [50.00p]/[50.00i]
When [FREQUENCY] is set to [59.94p]: [59.94p]/[59.94i]
When [FREQUENCY] is set to [50.00i]: [50.00i]
When [FREQUENCY] is set to [59.94i]: [59.94i]
f
Factory setting: [23.98PsF]
[3G-SDI OUT] Sets the format for the 3G-SDI signal output from the <SDI OUT 1>/<SDI OUT 2> terminal.
[LEVEL-A]: Selects the LEVEL-A method.
[LEVEL-B]: Selects the LEVEL-B DL method.
f
Factory setting: [LEVEL-B]
[SDI OUT 2 SIGNAL
SEL]
Sets the output from the <SDI OUT 2> terminal.
[SDI OUT 1]: Same output as the <SDI OUT 1> terminal.
[VF SDI]: Same output as the <VF SDI> terminal.
f
Factory setting: [SDI OUT 1]
[SDI OUT 1 CLEAN
VIEW]
Sets if the output from the <SDI OUT 1> terminal will be video only or to superimpose the signal for marker
or indicator.
[ON]: Outputs video only.
[OFF]: Outputs the signals for video and marker or indicator.
f
Factory setting: [OFF]