13
English
Electronic Board Operations Check
After assembling the electronic board, perform the procedures presented in the following table to make sure it
functions properly.
*
1
Contact the store or dealer from which the unit was purchased.
Step
Points to Check
Symptom
Solutions
1
Turn on the power switch.
“ ” flashes after “ ” lights up.
(Normal operation)
(If not)
Check power cord. (See
step 15 on page 11.)
2
Open the printer door and attach
the accessory thermal transfer film,
then close the printer door.
• Installing Thermal Transfer Film
procedure (refer to the Operating
Instructions on page 10)
“ ” flashes.
(Normal operation)
(If not)
Check thermal transfer
film.
3
Open the paper cover and insert
ordinary A4 (Letter) test paper, then
close the paper cover.
• Loading Copy Paper procedure
(refer to the Operating
Instructions on page 11)
“ ” lights up.
(Normal operation)
(If not)
Check copy paper.
4
Open the printer door.
“ ” flashes.
(Normal operation)
(If not)
*
1
5
Close the printer door.
“ ” lights up.
(Normal operation)
(If not)
*
1
6
Press .
Screen is fed.
(Normal operation)
The screen film surface is not fed
smoothly.
*
1
There are strange noises.
7
Use the accessory marker to
draw a large
filling the
entire copyable area of the
screen film surface.
• Copyable area (refer to the
Operating Instructions on
page 7)
Press
twice.
Press .
“ ” lights up and three copies are
made.
(Normal operation)
Three copies are not made.
*
1
The entire readable area is not printed.
There are strange noises or paper
jams during the copying process.
Multiple sheets of paper are fed
through at the same time.
8
Press
to move the screen
film surface. Write letters, etc.
with the marker.
Press
once.
Press .
The Contrast/Remaining Film indicator
light is turned on and one copy is made.
(Normal operation)
The Contrast/Remaining Film indicator
light is not turned on.
*
1
The image is not copied properly.
There are strange markings on the
copy sheet (e.g., stripes or lines).
9
Press
once.
The Contrast/Remaining Film indicator
light is turned off.
(Normal operation)
(If not)
*
1
10
Press .
Two screens are copied properly.
(Normal operation)
(If not)
*
1
UB-5325_IM_EN.book 13 ページ ２００８年１月８日 火曜日 午後５時７分
