Panasonic TY-WPR1 Operating Instructions (Functional Manual) Download Page 63 | Manualshive

Page: 63 / 65

background image

63

English

This product incorporates the following software:

(1) the software developed independently by or for Panasonic Connect Co., Ltd.,

(2) the software owned by third party and licensed to Panasonic Connect Co., Ltd.,

(3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0),

(4) the software licensed under the GNU LIBRARY General Public License, Version 2.0 (LGPL V2.0),

(5) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or

(6) open source software other than the software licensed under the GPL V2.0, LGPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (6) are distributed in the hope that it will be useful, but WITHOUT ANY

WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR

PURPOSE. For details, see the license conditions displayed by selecting [Software licenses], following the

specified operation from the Web setting screen of this product.
At least three (3) years from delivery of this product, Panasonic Connect Co., Ltd. will give to any third party who

contacts us at the contact information provided below, for a charge no more than our cost of physically performing

source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL

V2.0, LGPL V2.0, LGPL V2.1 or the other licenses with the obligation to do so, as well as the respective copyright

notice thereof.

Contact Information:

[email protected]

Trademark Credit

•HDMI, High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI

Licensing Administrator, Inc. in the United States and other countries.

•USB Type-C and USB-C are trademarks or registered trademarks of USB Implementers Forum.

•PressIT is a trademark of Panasonic Holdings Corporation.

•Bluetooth and the logo are trademarks of Bluetooth SIG, Inc. Panasonic Connect Co., Ltd. uses them under

license.

•Microsoft, Windows, Internet Explorer and Microsoft Edge are the registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

•Safari is a trademark of Apple Inc., registered in the United States and other countries.

•Google and Android are trademarks of Google LLC.

•Firefox is a trademark of the Mozilla Foundation in the United States and other countries.

•Miracast

TM

is a trademark of Wi-Fi Alliance.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully

respected.

Software License

«
...
61
62
63
64
65
»

Summary of Contents for TY-WPR1


































































Reviews:

No comments

Related manuals for TY-WPR1

Brand: Oki Pages: 8

Stylus Pro 7900

Brand: X-Rite Pages: 36

Brand: Panasonic Pages: 2

Brand: Samsung Pages: 53

Brand: Cane Creek Pages: 2

Brand: Harken Hoister Pages: 12

Brand: NAD Pages: 55

Brand: Smartech Pages: 8

Brand: Warrior Products Pages: 4

Brand: Napoleon Pages: 2

Brand: Jiuzhou Pages: 30

Brand: Harol Pages: 12

Brand: Gate Pages: 6

Brand: Dakota Digital Pages: 6

Brand: Eguana Technologies Pages: 9

TEAM CLIP-ON S-BEND

Brand: Vision Pages: 2

Brand: GE Pages: 12

Brand: Sandel Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands