9
English
7. Anchoring the plasma TV
Install the accessory screws for securing unit
(2) into the
mounting holes of the screws for securing unit on the sides
(left and right) of the wall-hanging bracket.
Securely tighten the left and right red-marked screws
(one
at the left and one at the right) used to anchor and release the
plasma TV in the red-marked screw mounting holes on the side
of the wall-hanging bracket used to anchor and release the
plasma TV.
(Tightening torque: 1.2 to 1.5 N•m)
Hole for mounting the screw
for securing unit
Screw for securing unit
Mounting hole for red-marked
screw used to anchor and
release the plasma TV
Wall-hanging bracket
Red-marked screw
used to anchor
and release the plasma TV
Surface of wall
Note
• In order to prevent the plasma TV from becoming disengaged from the
wall-hanging bracket, the screws for securing unit
must be securely
tightened at the left and right as far as their bases.
How to remove the plasma TV from the
wall-hanging bracket
Remove the screws for securing unit for the display
(one at the
left and one at the right) which are mounted on the sides of the wall-
hanging bracket.
Disconnect the wires connecting the plasma TV to the other units.
While lifting the bottom part of the plasma TV, pull the plasma TV
toward you.
Once the insulation spacers at the bottom have been released, lift
the plasma TV straight up.
Insulation spacer at the
bottom
Screw for securing unit
Surface of wall
Surface of wall
English
Summary of Contents for TY-WK5P1RW
Page 2: ...2 ...
