7
Installation procedure
Push the upper insulating spacers on the display
into the notches at the top of the wall-hanging
bracket until they are hooked in, then lower the
display into place.
While lifting the display slightly, insert the lower
insulating spacers on the display into the lower
hanging holes in the wall-hanging bracket, then lower
the display.
3) Install the display to the wall-hanging bracket.
Position the display so that the power switch is located at the bottom.
Insulating spacer
Power
switch
Top holes
Lower
holes
Insulating spacer
Top holes
Lower
holes
Power
switch
• Tighten the fixing screws on the left side.
4) Tighten the fixing screws.
;
;
Screws locations
(upper and lower)
(Left side view)
• Do not lift the display too high, otherwise it may become
unhooked.
Note
• Be sure to fix the left side fixing screws to stabilize the
display.
Caution
（
For TY-WK42PV1
）
（
For TY-WK42PV7
）
