Panasonic TY-SB01F, Operating Instructions Manual, Page: 12 / 20

Installing the SFP module
12 ‑ ENGLISH
How to remove the SFP module
Lever
Latch
Lever
SFP modules
Fig.1
Fig.2
1) Disconnect the optical fiber cable.
f
If the optical fiber cable is connected to the SFP module, remove the
cable while releasing the latch of the optical fiber cable.
2) Release the latch of the SFP module. (Fig. 1)
f
Pull down the lever on the SFP module to release the latch.
3) Remove the SFP module. (Fig. 2)
f
Hold the lever and slowly pull out the SFP module.
Attention
f
Make sure to attach the port cover on the SFP port that the SFP module is not installed.
f
Store the removed SFP module with the protection cap, etc., attached so that dust does not
accumulate or the SFP module does not get dirty.