background image

ENGLISH - 11

Specifications

Lens type

Liquid Crystal Shutter 

Batteries

(duration)

Coin-shaped lithium battery CR2032

(approx. 75 hours in continuous use)

Dimensions

Width: 

 

6.97” (177 mm)

Height:   

1.82”   (46 mm)

Overall length: 

6.86” (174 mm)

Power supply

DC 3 V

Materials

Main body: Resin 

Lens section: Liquid crystal glass

Mass

(including batteries)

Approx. 0.14 lb. (approx. 63 g)

Viewing range*

1

Transmitter for 3D Eyewear 

Within 3.2 m (10'5") from front surface 

(Within ± 35° horizontal, ± 20° vertical)

Usage temperature range

32°F - 104°F (0 °C - 40 °C)

*

1

 Viewing range

 

 

The location of the 3D Eyewear transmitter differs depending on the model of 

television.

 

 

There are differences in the viewing range of the 3D Eyewear among individuals.

 

 

The 3D Eyewear may not operate correctly at the outside of the viewing range.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or 

dealer and ask for the correct method of disposal.

Environment care information for users in China

This symbol is only valid in China.

Summary of Contents for TY-EW3D10U

















Reviews: