V
iewing 3D images
33
Replacing the battery
When the battery is running low, the indicator lamp flashes 5 times on turning the 3D Eyewear on.
In this case, early battery replacement is recommended.
Ɣ
Dispose of the old batteries as non-burnable rubbish, or in line with the waste disposal regulations in your local area.
1
Loosen the screw and remove the cover using with a precision Phillips (No.0, plus + ) screwdriver.
Ɣ
The screw is not removed from the cover.
2
Replace the battery
Ɣ
If difficulty, remove it with the tip of the driver.
Ɣ
Use the specified type of battery (coin-shaped lithium
battery CR2032).
Ɣ
Note the correct polarity (+ or -).
3
Replace and fasten the cover.
Ɣ
Push the cover firmly until it clicks
Ɣ
Tighten the screw
Summary of Contents for TY-ER3D4MA
Page 10: ......