- 201 -
New Channel Message
(
On
/
Off
)
Selects whether to give a notification message when a new channel is found
or not.
Watching Tuning and editing channels New Channel Message
●
For DVB mode
Service Replacement
(
On
/
Off
)
Set to
On
to display a message to switch to the available service (only
available in some countries).
●
For DVB-C mode
Signal Condition
Checks the signal condition.
Watching Tuning and editing channels Signal Condition
●
Not valid in Analogue mode
Antenna System
(
One LNB
/
MiniDiSEqC
/
DiSEqC 1.0
/
Single Cable
)
Sets the antenna system to use plural LNBs for receiving several satellites.
Watching Tuning and editing channels Auto Setup
●
This TV supports DiSEqC Version 1.0.
●
For DVB-S mode
LNB Configuration
Selects the satellite for each LNB.
Watching Tuning and editing channels Auto Setup
●
For DVB-S mode
Attenuator
(
On
/
Off
)
Automatically reduces the DVB-C signal to avoid the interference.
●
If the DVB-C signal is too strong, the interference may occur. In this case,
set to
On
to weaken the signal automatically.
Summary of Contents for TXP50VT60Y
Page 1: ...eHELP English TX P50VT60Y TX P55VT60Y TX P65VT60Y ...
Page 224: ...Ver 1 01 ...
