31
9.16. Remove the Cabinet mount
metals
1. Remove the One leg bracket. (See section 9.15.)
2. Remove the Cabinet mount metals fastening screws (
×
7
,
×
14
) and remove the cabinet mount metal top
and the Cabinet mount metal bottom.
9.17. Remove the D-Board
1. Remove the AC inlet. (See section 9.1.)
2. Remove the Woofer. (See section 9.9.)
3. Disconnect the flexible cables (D5, D20, D31 and D32).
4. Disconnect the connector (D25).
5. Remove the screws (
×
4
) and remove the D-Board.
9.18. Remove the C1-Board
1. Remove the Hanger metal R and the One leg bracket.
(See section 9.15.)
2. Remove the Cabinet mount metal bottom (See section
9.16.).
3. Remove the flexible cable holder fastening screws (
×
12
).
4. Disconnect the flexible cables (CB1, CB2, CB3, CB4,
CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (
×
4
) and remove the C1-Board.
Summary of Contents for TXP42VT20E
