Accessories / Options
●
7
Attaching the stand
Warning
Do not disassemble or modify the stand.
Otherwise the TV may fall over and become damaged, and personal injury may result.
●
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
●
Do not use the stand if it becomes warped or physically damaged.
If you use the stand while it is physically damaged, personal injury may result. Contact your nearest Panasonic
●
dealer immediately.
During set-up, make sure that all screws are securely tightened.
If insufficient care is taken to ensure screws are properly tightened during assembly, the stand will not be strong
●
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the stand with the TV installed, the TV may fall over and personal
●
injury may result.
Two or more people are required to install and remove the TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
●
Do not tilt the TV by
placing something
between the stand and the
floor. TV may fall over and
become damaged, and
personal injury may result.
Stand is very heavy.
Please handle with
both hands as shown
in image.
Assembly screw (4)
■
Stand
■
TBLX0186 (TX-L32D28EP, TX-L32D28ES, TX-L32D28EW)
●
TBLX0187 (TX-L37D28ES, TX-L37D28EW)
●
M4 × 12
Securing the TV
■
Use the assembly screws to fasten
securely.
Make sure that the screws are
●
securely tightened.
Carry out the work on a horizontal and
●
level surface.
Depending on the length of the screw
●
driver you use, it is difficult to tighten
the two screws at the bottom. Make
sure all screws are securely tightened.
Foam mat or thick soft cloth
To prevent from falling, please
secure the TV to the wall by using
strong string or wire.
Put the strong string or wire through
●
the hole on the bottom rear of the TV
as shown in the illustration.
