24
9 Disassembly and Assembly Instructions
9.1.
Remove the Rear cover
1. See PCB Layout (Section 3)
9.2.
Remove the AC inlet
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connector (P9).
3. Remove the screw (
×
1
) and remove the AC inlet.
9.3.
Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (P2, P6, P7, P9, P11 and
P35).
3. Remove the screws (
×
9
) and remove the P-Board.
9.4.
Remove the Side terminal
cover and the Side shield metal
1. Remove the screws (
×
2 ,
×
1 ,
×
1 ).
2. Remove the Side terminal cover.
3. Remove the Side shield metal.
Summary of Contents for TX-PR42S20
