Confidential
3 - Make sure the back cover perimeter has no deformations, as this may result in bad assembly and possible
SERVICE HINT
MQMSH0005DG090913REV2
Ref No:
For Authorised Service Agents Only
Notes:
• Not following these indications may cause permanent panel damage (glass micro crack). Critical items when
panel damage.
assembling back cover:
2 - DO NOT use material that is out of specification.
1 - DO NOT insert screws to back cover if it is not properly aligned (please refer to sections details).
Make sure back cover is correctly assembled /
aligned before inserting screws, please review
"section 1" for TOP and "section 2" for BOTTOM.
NOTE: DO NOT insert screws if the back cover is
not correctly assembled / aligned as this may
cause damage to panel.
FIT inside - good
FIT outside – NO good (visible bump, hump)
Panasonic
2 of 2
Document No: MQM_SH
Rev: 2.00 DG140612