Panasonic TX-P42ST60B, User Manual

Page: 43 / 167

- 43 -
3D Eyewear - Functions
■
Part names and functions
Power button / Mode change / Indicator lamp
●
Power button
– Press and hold for approx. 1 second to turn the 3D Eyewear On.
(The indicator lamp lights for 2 seconds.)
– Press and hold for approx. 2 seconds to turn the 3D Eyewear Off.
(The indicator lamp lights 3 times.)
●
Mode change
– Press and hold for approx. 1 second to change the mode between
3D and 2D (view a 3D image in 2D).
– When power is off, press and hold for approx. 5 seconds to change
to registration mode.
Watching 3D 3D Eyewear - Registration
●
Indicator lamp
– Lights or flashes during use to show the status (see below).
Protection film
– Peel off the protection film on both side of the lens.
Insulating sheet
Battery cover
– When using for the first time, remove the insulating sheet. Pull the
insulating sheet.
– To replace the battery
Watching 3D 3D Eyewear - Replacing battery
■
Indicator lamp status
●
Lights red for 2 seconds when turned on:
Sufficient battery level
●
Flashes 5 times when turned on:
Low battery level