On screen messages
97
Message
Meaning / Action
Feature not available.
•
It is not possible to record from COMPONENT or HDMI. Connect
the recorder to the TV using a fully wired SCART cable for recording
from the TV tuner.
•
Confirm Q-Link or VIERA Link settings
(p. 76 - 79)
Feature not available.
Press OK to view how it works.
•
The selected feature on VIERA TOOLS is not available. Press the
OK button to view the demonstration to explain how to use it.
Found new software
version
∗∗∗
.
Press OK to start update
(may take over 40 mins) or
press EXIT to ignore and
you can update when TV is
in standby
•
There is a new software available.
Invalid operation - Please
check settings and
connections.
•
Check the Q-Link or VIERA Link connection and setting
(p. 76 - 79)
Invalid system time. Please
exit !
•
Cannot get the time information and cannot edit Timer Programming
screen. Check the connection of the RF cable.
Invalid system time, Timer
Programming will not work.
Please press TV button on
remote control and check
time display on Banner
•
Cannot get the time information. If there is no time displayed on the
Information banner, check the connection of the RF cable.
Max. number of timers
already set !
•
The maximum number of timer programming events is 15.
New channels found!
Press OK to update
channel list.
Press EXIT to ignore.
•
There may be new channels available.
•
This message will appear each time a change is made by the
broadcasters. This message can be deactivated by setting [New
Channel Message] to Off in [DVB Tuning Menu].
Selecting OK will perform [Update Channel List].
No channel found.
Please check aerial or
local signal availability.
Press OK to start Auto Setup.
•
Follow the on screen instructions.
•
Please also refer to p. 94.
•
If channels are still not found, consult your local Panasonic dealer.
No module inserted
•
Check the CI module is inserted completely (p. 57).
No recording - Already
recording
•
The equipment may already be recording.
No recording - Check
media
•
The tape or disc may be “write protected”, full, missing or damaged.
No recording - Playing
•
The equipment may be playing the tape or disc.
No recording - Unknown
reason
•
The recording may not be performed. Check the equipment.
No service
•
The broadcaster has stopped the service. Check the channel in the
TV Guide. (p. 22)
No signal
•
The TV cannot detect the signal. Check the connection of the RF
cable.
Overcurrent error on USB
device occurred.
Please remove the USB
device, and switch off the
TV by mains power switch.
•
The connected USB device might cause overcurrent error. Follow
the on screen instructions.
•
Check if foreign objects are inside the USB port.
PIN incorrect!
•
The PIN number you entered is wrong.
Please check settings
and connections on HDMI
devices.
•
Communication error in VIERA Link function (p. 79).
Please wait.
•
A function is in progress.
Recording this channel
now
•
The recorder is recording the programme from its own tuner. You
can turn the TV off and leave the equipment recording in the normal
way.
