- 19 -
= Note =
●
External equipment and cables shown are not supplied with this TV.
●
Please also read the manual of the equipment being connected.
●
Keep the TV away from electronic equipment (video equipment, etc.) or
equipment with an infrared sensor, otherwise distortion of image / sound
may occur or operation of other equipment may be affected.
●
When using a SCART or HDMI cable, it is recommended to use fully wired
one.
●
Check the terminal type and cable plugs are correct when connecting.
Selecting channel
1. Display the
TV Selection
screen with
TV
2. Select the mode with / and press
OK
to set
freesat
(UK only) /
DVB
/
Analogue
/
Other Sat.
(UK only) /
Satellite
(Ireland only)
●
Other Sat.
is displayed if
Auto Setup
is completed for Other Sat.
channels.
Watching Tuning and editing channels Auto Setup
●
The selectable modes vary depending on the channels stored.
●
You can also select the mode pressing
TV
repeatedly on the remote
control or INPUT/OK/HOLD for MENU button on the control panel of
the TV.
●
If the
TV Selection
menu is not displayed, press
TV
to switch the mode.
3. Select a channel with Channel Up / Down or numeric buttons
●
freesat channel position numbers are in the 100 - 999 and 0100 - 0999
ranges. DVB and Other Sat. / Satellite channel position begin from
number 1 upward. Analogue channel position numbers are in the 0 - 99
range.
■
To select a channel using information banner
It is possible to confirm the channel name and programme information by
using the information banner before changing channels.
1. Display information banner with if it is not displayed
2. Select a channel with / and press
OK
to watch while the banner is
displayed
Summary of Contents for tx-l55wt65b
Page 1: ...eHELP English TX L47WT65B TX L55WT65B ...
Page 241: ...Ver 2 02 ...
