- 33 -
●
You can set
Viewing Mode
in 2D and 3D mode for each.
Ambient Sensor
1. Display the menu with
MENU
2. Select
Picture
Ambient Sensor
with / and press
OK
to access
3. Select
On
/
Off
with / and press
OK
to set
Ambient Sensor
(
On
/
Off
)
●
Automatic Brightness Control function
Adjusts picture settings automatically depending on ambient lighting conditions.
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
●
Off Timer
is active.
●
No operation is performed for 4 hours while
Auto Standby
is set to
On
.
●
No signal is received and no operation is performed for 10 minutes while
No signal Power off
is set to
On
.
Settings Timer No signal Power off
= Note =
●
This function does not affect the recording of
Timer Programming
and
One
Touch Recording
.
Aspect
Change the aspect ratio (image size) with
ASPECT
.
■
To change the aspect ratio manually
1. Display
Aspect Selection
list with
ASPECT
2. Select the mode with / and press
OK
to set
●
You can also change the mode pressing
ASPECT
.
(Press repeatedly until you reach the desired mode.)
Auto
:
The best ratio is selected automatically according to the “Aspect Control
Signal”.
Summary of Contents for TX-L42FT60E
Page 1: ...eHELP English TX L42FT60E TX L47FT60E ...
Page 198: ...Ver 2 02 ...
