background image

Rear Panel Connections 
Monitor Out 

 

41 

The Monitor Out terminals reproduce the signals currently on the television screen. The on-screen signals 
could be a television programme or signals connected to one of the AV inputs. 

 

 

The Monitor Out facility can be used to 
allow one video source (videotape, 
videodisc etc.) to be connected to more 
than one television. Connect the Monitor 
out from this television to the AV Input of 
the second television. 
 
If a video recorder is connected to the 
Monitor  Out and video sources are 
connected to one or more of the AV 
inputs, the television becomes a visual 
display for tape editing or copying.  

 
NOTES:

 

Make sure that the Scart adaptor is switched to OUT. 

 

Never connect the same video recorder or other device to both the VIDEO IN and MONITOR OUT 
terminals of this television as this could cause incorrect operation.  
 
 
 
 

Audio Out 

 
The Audio Out terminals allow you to connect the television to an amplifier of audiocassette recorder. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

WARNING 

Unauthorised recording of material from Television Broadcasts or from other video 

and / or audio sources may contravene copyright laws 

S

E

R

IA

L

AV1

AV2

AV4

M

O

D

E

M

CI 1

TO ACCESS COMMON

INTERFACE SLOTS PLEASE

REMOVE COVER

CI 2

AUDIO OUT

Stereo Amplifier

S

E

R

IA

L

AV1

AV2

AV4

M

O

D

E

M

C I   1

TO ACCESS COMMON

INTERFACE SLOTS PLEASE

REMOVE COVER

C I   2

AUDIO OUT

Summary of Contents for TX-76DT30A

















































Reviews: