Panasonic TX-75FXW785 Manual Download

Page: 124 / 342

Recording

USB HDD setup

Preparations

You can record the digital TV programmes to the connected USB HDD and

enjoy playing back in various ways.

●

Prepare the USB HDD for the exclusive use of recording with this TV.

●

Depending on the model, it may be necessary to remove the terminal

cover / cable cover before connecting or disconnecting cables.

●

Connect the USB HDD to the USB 1 or USB 2 port with the USB cable.

(Refer to the terminal indication of TV set.)

●

Be sure to connect the USB HDD to the mains socket.

●

To remove the USB HDD safely from the TV, perform

Safely remove USB

USB Device Setup

Recording > USB HDD setup > Setting for USB HDD

●

Check the terminal type and cable plugs are correct for connection.

  USB port
  USB cable
  USB HDD
  Mains socket

= Caution =

●

All data in the USB HDD will be erased in the following cases:
– When formatting the USB HDD with this TV

Recording > USB HDD setup > Setting for USB HDD

– When formatting the USB HDD to use on PC, etc.

●

When the TV is repaired due to a malfunction, you may have to format

the USB HDD again with this TV to use it. (All data will be erased after

formatting.)

- 124 -

Summary of Contents for TX-75FXW785























































































































































































































































































































































Search results

Summary of Contents for TX-75FXW785

Reviews:

Related manuals for TX-75FXW785

Brands by name

Popular brands

Panasonic TX-75FXW785, Manual

Search results

Summary of Contents for TX-75FXW785

Reviews:

Related manuals for TX-75FXW785

Brands by name

Popular brands