2) Set
Satellite
for the selected LNB.
– Select
No Satellite
if you do not know the connected satellite.
(Available satellite is searched in
Auto Setup
.)
– Select
User defined
to set
Test Transponder Frequency
manually.
– If you set to
Single Cable
, additional settings are required. Set
SingleCable Version
,
User Band
,
User Band Frequency
and
PIN
(depending on the Single Cable router you use). For details, read
the manual of the Single Cable router.
Watching > Tuning and editing channels > Selectable satellites
5. Press
BACK/RETURN
to store.
6. Select
Auto Setup
and press
OK
to access.
7. Select
Search Mode
/
Scan Mode
and press
OK
to access.
8. Set the item and press
OK
to store.
●
Scan Mode
Full
:
Scans the whole frequency range.
Quick
:
Scans the suitable frequency for the selected satellite.
●
After settings, select
Start scan
and press
OK
to search.
9. A confirmation screen is displayed and press
OK
to start
Auto Setup
.
(Settings are made automatically.)
●
When the operation is completed, the channel at the lowest position will
be displayed.
= Note =
●
Set
Dual Tuner Mode
to
On
to select DVB-S signal for DVB-via-IP server
function.
■
DVB-C, DVB-T, Analogue
1. Select
Auto Setup
and press
OK
to access.
2. Set
DVB-C Auto Setup Settings
and press
OK
to store. (DVB-C)
●
Scan Mode
Full
:
Scans the whole frequency range.
Quick
:
Scans the suitable frequency in your country.
- 120 -
Summary of Contents for TX-58DX900E
