Data Copy from TV set to USB Memory
1. Turn on the TV set.
2. Insert USB Memory with a startup file (pwd file) to USB Terminal.
On-screen Display will be appeared according to the startup file automatically.
3. Input a following password for (a) or (b) by using remote control.
(a) For Board replacement: 2770
(b) For Hotel: 4850
Data will be copied from TV set to USB Memory.
It takes around 1 to 2 minutes maximum for copying.
4. After the completion of copying to USB Memory, remove USB Memory from TV set.
5. Turn off the TV set.
Note:
Following new folder will be created in USB Memory for data from TV set.
(a) For Board replacement: user_setup
(b) For Hotel: hotel
Data copy
(Board replacement) or (Hotel)
Input Password
2770
or
4850
Performing
Completion
Performing
Data Copy(Board replacement )
Input password
-----
Data Copy(Board replacement )
Input password
-----
Data Copy(Board replacement )
Copy TV to Media
Please wait for a while
Please do not remove the Media
GETTING
Data Copy(Board replacement )
Data copy has been successful
Please remove Media
FINISH
18
Summary of Contents for TX-55DX600E
Page 30: ...Packing Structure 29 TV SET 30 39 31 Pedestal assy 30 ...
Page 75: ...75 ...
