22
8.2.
Disassembly Procedure for the Unit
Lay down the unit so that the rear cover faces upward.
8.2.1.
Pedestal
1. Remove the 4 screws.
2. Remove the Pedestal.
8.2.2.
AC Inlet Holder
Caution:
To remove AC Inlet Holder wait 1 minute after power was off
for discharge from electrolysis capacitors.
1. Remove the 2 screws.
2. Remove the AC Inlet Holder.
8.2.3.
Back Cover
1. Remove the 23 screws (A).
2. Remove the 8 screws (B).
3. Remove the Back Cover.
8.2.4.
Bottom Back Cover
1. Remove the 4 screws.
2. Remove the Bottom Back Cover.
Summary of Contents for TX-55CX670E
