English
3
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator,
Inc. in the United States and other countries.
Dolby, Dolby Vision, Dolby Atmos, Dolby Audio, and the
double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license from Dolby Laboratories.
Confidential unpublished works. Copyright © 2012-2019
Dolby Laboratories. All rights reserved.
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Panasonic Corporation is under license.
DVB and the DVB logos are trademarks of the DVB
Project.
x.v.Colour™ is a trademark.
This product complies with the UHD Alliance Technical
Specification: UHDA Specified Reference Mode, Version
1.0.1. FILMMAKER MODE™ logo is a trademark of
the UHD Alliance, Inc. in the United States and other
countries.
For information about the trademarks, refer to
[eHELP] (Search by Purpose > Read first >
Before use > Licence).
The illustration for TX-65HZ980B is used in this
manual unless otherwise mentioned.
Illustrations shown may be different depending on
the model.
Important Notice
Do not display any still part of the image
for a long period
In such cases the still part of the image remains dimly
on the screen (“image retention”). This is not considered
a malfunction and is not covered by the warranty.
Typical still image parts:
•
Still images shown continuously on the same area
(ex. channel number, channel logo, other logos or
title image, etc.)
•
Still or moving pictures viewed in
4:3 or 14:9 aspect ratio, etc.
•
Video games
To avoid image retention, the screen saver may
be activated (OLED logo moves) or the on-screen
message may move after a few minutes if no signals
are sent or no operations are performed.
Set [Logo Luminance Control] to [Max] to avoid image
retention.
[eHELP] (Search by Purpose > Settings > Picture >
Screen Settings > Logo Luminance Control)
To avoid image retention, the screen may become
dim when the motionless image is displayed. This
is not a malfunction. The brightness of the screen
returns to the previous level when the active image is
displayed.
Be sure to turn the TV off with the remote control to
perform the panel maintenance. During the panel
maintenance, LED turns to orange. (p. 20) The
maintenance works as necessary.
Set aspect ratio to [4:3 Full] for 4:3 image. For details,
refer to [eHELP] (Search by Purpose > Watching >
For best picture).
For more information
“Panel maintenance” (p. 20)
Summary of Contents for TX-55980B
Page 27: ......
