background image

English

   - 28 -

• 

The location where the transmission is most effective 

differs depending on the usage environment.

• 

The Wireless feature of the TV supports 802.11 a,b,g 

&  n  type  modems.  It  is  highly  recommended  that 

you should use the IEEE 802.11n communication 

protocol  in  order  to  avoid  any  possible  problems 

while watching videos.

•  You must change your modem’s SSID when there 

are any other modems around with the same SSID. 

You can encounter connection problems otherwise. 

Use a wired connection if you experience problems 

with a wireless connection. 

Configuring Wireless Device Settings

Open the 

Network

 menu and select 

Network Type

 as 

Wireless Device

 to start connection process.

Highlight 

Scan Wireless Networks 

option and press 

OK

 to start a search for available wireless networks. 

All found networks will be listed. Highlight your desired 

network from the list and press 

OK

 to connect. 

Note:

 If the modem supports N mode, you should set N 

mode settings.

If the selected network is password-protected, enter 

the correct key by using the virtual keyboard. You can 

use this keyboard via the directional buttons and the 

OK

 button on the remote control.

Wait until the IP address is shown on the screen.
This means that the connection is now established. 

To  disconnect  from  a  wireless  network,  highlight 

Network Type 

and press Left or Right buttons to set 

as 

Disabled

.

If your router has WPS, you can directly connect to the 

modem/router without entering a password or adding 

the network first.

 

Highlight 

Press WPS on your wifi 

router

 option and press 

OK

. Go to your modem/router 

device and press the WPS button on it to make the 

connection. You will see a connection confirmation on 

your TV once the devices have paired. Select 

OK

 to 

proceed. No further configuration is required.

Highlight 

Internet Speed Test

 and press the 

OK

 button 

to  check  your  internet  connection  speed.  Highlight 

Advanced

 

Settings 

and press the 

OK

 button to 

open the advanced setting menu. Use directional and 

numeric buttons to set. Highlight 

Save

 and press the 

OK

 button to save settings when complete. 

Other Information

The  status  of  the  connection  will  be  displayed  as 

Connected

 or 

Not

 

Connected

 and

 

the current IP 

address, if a connection is established.

Connecting to your mobile device via WLAN

• 

If your mobile device has WLAN feature, you can 

connect it to your TV via a router, in order to access 

the  content  in  your  device.  For  this,  your  mobile 

device must have an appropriate sharing software.

  Connect your TV to your router following the steps 

mentioned in the sections above.

  Afterwards, connect your mobile device to the router 

and then activate the sharing software on your mobile 

device. Then, select files that you want to share with 

your TV.

  If  the  connection  is  established  correctly,  you  will 

be able to access the shared files installed on your 

mobile  device  via  the AVS(audio  video  sharing) 

feature of your TV.

  Highlight the 

AVS

 option in the 

Sources

 menu and 

press 

OK

,  available  media  server  devices  in  the 

network will be displayed. Select your mobile device 

and press the 

OK 

button to continue.

•  If available, you can download a virtual remote 

controller application from the server of your mobile 

device application provider. 

Note: 

This feature may not be supported on all mobile 

devices.

Handling of the customer information

When using Internet connecting function of this TV, 

after agreeing to Panasonic’s terms of service / privacy 

policy (hereinafter referred to as terms and conditions 

etc.), Customer Information on the use of this unit 

may be collected and used according to terms and 

conditions etc.
For details of terms of service / privacy policy, refer to 

[HOME] Settings>Privacy Settings

Customer’s personal information may be recorded on 

this TV by broadcasting organisation or application 

provider. Before repairing, transferring or discarding 

this TV, erase all the information recorded on this TV 

according to the following procedure.

[HOME] Installation>First time installation

Customer information may be collected by provider 

via application provided by third parties on this TV or 

website. Please confirm the terms and conditions etc. 

of provide in advance.
•  Panasonic will not be held responsible for collecting 

or using customer Information via application 

provided by third party on this TV or website.

•  When entering your credit card number, name, etc., 

pay special attention to the trustworthiness of the 

provider.

•  Registered information may be registered in the 

server etc. of provider. Before repairing, transferring 

or discarding this TV, be sure to erase the information 

according to the terms and conditions etc. of provider.

Wake ON

Wake-on-LAN (WoL) and Wake-on-Wireless LAN 

(WoWLAN) are standards that allow a device to be 

turned on or woken up by a network message. The 

message is sent to the device by a program executed 

Summary of Contents for TX-43GS351B


































Reviews: