background image

13

English

3

  Select the type of [Home Screen]

The demonstration to explain how to use [my Home 
Screen] is displayed. Confirm the demonstration by 
following the on-screen instructions, and then select the 
desired [Home Screen].

Example: [Home Screen Selection]

Example: [TV Home Screen]

Auto Setup is now complete and your 
TV is ready for viewing.

If tuning has failed, check the connection of the network, 
RF cable, and then follow the on-screen instructions.

Note

 

The TV will automatically go into Standby mode 
when no operation is performed for 4 hours if [Auto 
Standby] in the Timer Menu is set to [On].

 

The TV will automatically go into Standby mode when 
no signal is received and no operation is performed 
for 10 minutes if [No signal Power off] in the Timer 
Menu is set to [On].

 

To retune all channels 

  [Auto Setup] in [Tuning Menu] (Setup Menu)

 

To initialise all settings 

  [Shipping Condition] in [System Menu] (Setup 

Menu)

First time Auto Setup

Automatically sets up the TV and searches for available 
TV channels when the TV is turned on for the first time.

 

These steps are not necessary if the setup has been 
completed by your local dealer.

 

Please complete connections (p. 8 - 10) and settings 
(if necessary) of the connected equipment before 
starting Auto Setup. For details of settings for the 
connected equipment, read the manual of the 
equipment.

1

  Plug the TV into mains socket and 

turn power on

 

Takes a few seconds to be displayed.

2

  Select the following items

Set up each item by following the on-screen instructions.

Example:

 

 

Please select your viewing environment.

Home

Shop

 

How to use remote control

Move the cursor

Access the item / store the setting

Return to the previous item (if available)

Select [Home]

Select [Home] viewing environment to use in your home 
environment.

 

[Shop] is for shop display.

 

To change viewing environment later on, you will 
need to initialise all settings by accessing Shipping 
Condition.

Set up the network connection

Select your country 

Select your region 

Summary of Contents for TX-42AS520B





















Reviews: