Panasonic TX-40GX700E, Operating Instructions Manual

Page: 18 / 80

English
18
Installing / Removing batteries
Pull open
Hook
Note the correct
polarity (+ or -)
Close
Indicator / Control panel
4
5
6
3
1 2
Rear side of the TV
Note
Location of indicators may vary depending on the
models.
1 Remote control signal receiver
Do not place any objects between the TV remote
control signal receiver and remote control.
Ambient sensor
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Video Menu is set to [On].
2 Power LED
Red:
Standby
Green:
On
Orange:
Standby with some functions (recording, etc.)
active
The LED blinks when the TV receives a command
from the remote control.
3 Input mode selection
Press repeatedly until you reach the desired mode.
[Main Menu]
Press and hold for about 3 seconds to display main
menu.
OK (when in the menu system)
4 Channel Up / Down
Cursor Up / Down (when in the menu system)
5 Volume Up / Down
Cursor Left / Right (when in the menu system)
6 Mains power On / Off switch
Use to switch the mains power.
To turn Off the apparatus completely, you must pull
the mains plug out of the mains socket.
[ ]: Standby / On